Yes. Tesla states that the Wall Connector is rated for indoor or outdoor mounting. For an outdoor installation, follow Tesla’s installation manual, use wiring and conduit rated for wet locations, mount it at the recommended height, and consider shade, snow and theft. The same advice applies to other outdoor-rated wall chargers.
Outdoor Installation Checklist
- Use wet-location rated conductors and sealed conduit entries.
- Mount at the height Tesla recommends and above snow and splash level; see how high to mount an EV charger.
- Place it so the cable reaches the charge port without crossing a walkway.
- Shade from strong afternoon sun where possible.
- Protect from vehicle impact.
- Check Wi-Fi signal outdoors if you want app features.
Wiring
For full 48 A output, the Wall Connector needs a 60 A circuit; see Tesla Wall Connector wire and breaker. A licensed electrician should install it under local code.
Other Outdoor-Rated Chargers
The EVDANCE EV-ACT5006T 48A Level 2 wall charger is an IP65/IP66 NACS wall charger with a 25 ft cable, and the EVDANCE EV-ACT3204E 22 kW wallbox is an IP65/IP66 three-phase wallbox. See can a home EV charger be installed outside.
Frequently Asked Questions
Is the Tesla Wall Connector waterproof?
It is rated for outdoor use; do not submerge it.
Does it work in snow?
Yes, mounted above snow level with the connector holstered.
Can I install it on a pedestal?
Pedestal mounting is possible with suitable hardware; follow Tesla’s guidance.
Related Reading
- Can a Home EV Charger Be Installed Outside?
- Inside or Outside the Garage?
- Is the Tesla Wall Connector Worth It?
Key Takeaways
- Tesla rates the Wall Connector for indoor or outdoor use.
- Use wet-location wiring and follow the mounting height.
- A 60 A circuit is needed for full 48 A output.