None of the three is included with the charger, and none is listed for it. The EV-ACS3210T’s listing covers the charger itself: a 32 A NACS portable with six current steps (10, 12, 16, 20, 24 and 32 A), a 1.77-inch display and an IP66 enclosure. A holster, a carry bag and a wall bracket are generic accessories bought separately, and each earns its place only if it fits this particular unit.
Key Takeaways
- No holster, bag or bracket is listed for this model — all three are generic buys, judged on fit.
- The holster must be NACS-shaped; a J1772 dock will not hold this connector.
- Buy the bag on the whole kit — box, coil and plug — with padding over the display.
- The bracket parks the control box; it must leave the display visible and the setting reachable.
Start With What the Listing Does Not Include
The product page is the record of what this charger’s range contains, and it lists no holster, bag or bracket. That is the normal arrangement for portable chargers: the accessory market for this unit is generic, judged on measurements and shapes, not on a model name. None of these three is electrical: nothing here plugs in or carries current. If you ever add something that does — a spare cable or an adapter — look for a recognised testing laboratory’s listing; OSHA’s programme is described in the sources.
The Holster: It Has to Match a NACS Connector
A holster is the connector’s parking spot at home: capped, covered and off the floor instead of dangling by its cable. The deciding check is the connector shape. This unit is NACS, so the holster must be shaped for a NACS connector — a J1772-shaped dock will not hold it properly, and forcing the fit leaves the connector face exposed. Check also that the cable leaves the dock without a sharp bend at the entry: that bend is where cable jackets wear first. Placement and routing are covered in our guide to hiding and managing an EV charger cable.
The Bag: Sized by the Coil, the Box and the Plug
A portable’s carry kit is three things: the control box, the cable in its coil, and the chunky NEMA 14-50 plug. A bag earns its place if all three fit together without forcing the coil tighter than its natural curve — tight bends held for weeks are how cable jackets take a set, part of what decides how long a charging cable lasts. Two checks are specific to this unit: its 1.77-inch display is the face most likely to meet loose cargo, so look for padding over it; the connector rides capped, on top of the coil, not buried at the bottom where grit collects.
The Wall Bracket: A Parking Spot for the Control Box
The holster parks the connector; a bracket parks the box — a fixed home corner for the unit, clicked in beside the outlet and unclipped when it travels. Three checks decide it. First, it must suit a unit of this size and weight: compare its stated load rating with the charger. Second, it must leave the unit’s face usable — the setting is something you change and the display is how you confirm it, so a bracket that buries the face is the wrong bracket. Third, parked in it, the plug must still reach the outlet with the cable hanging naturally — no sideways pull. Fixing one is a mounting question, not an electrical one: nothing is wired, and the bracket maker’s instructions govern the fixings.
| Accessory | What it has to fit on this charger | The check that decides it |
|---|---|---|
| Holster | The NACS connector | NACS shape; connector parks capped, cable exits without a sharp bend |
| Carry bag | Box, coiled cable and 14-50 plug as one kit | All three fit in the cable’s natural loops; padding sits over the display |
| Wall bracket | The control box, beside its outlet | Display visible and setting reachable once parked; plug reaches without sideways strain |
The charger these accessories fit around is the EVDANCE EV-ACS3210T: a 32 A NACS portable delivering about 7.7 kW from a NEMA 14-50 plug, six current steps, a 1.77-inch display, IP66 enclosure, 3-year standard warranty. The full range is on our products page.
Frequently Asked Questions
Does EVDANCE sell a holster, bag or bracket for the EV-ACS3210T?
None is listed for this charger — the product page is the record to check. These are generic accessories, and the fit checks above matter more than branding.
Will a J1772 holster fit this charger?
No. The holster has to match the connector, and this unit’s is NACS — a J1772-shaped dock holds a different connector. Buy the NACS shape.
Can an accessory make the charger charge faster or add features?
No. None of the three changes anything electrical; speed is set by the current step, the circuit and the car.
Related Reading
- How to Hide and Manage an EV Charger Cable
- Are Portable EV Chargers Worth It? Pros, Cons and Who Should Buy One
- How to Clean an EV Charger Connector
