Evdance
Select Language
English (US)
Deutsch
Français
Nederlands
Polski
Русский
한국어
ภาษาไทย
Tiếng Việt
Español
Português
العربية

EV-ACS4005T Carry Case and Accessories: What to Add

The EV-ACS4005T needs no add-ons to charge. Worth buying: a case fitted to its cable coil, a home holster and hook, and a JT02 for J1772 households.

EVDANCE Insights · EV Charging Guides

The EV-ACS4005T needs nothing added in order to charge — the adds that earn their place are about carrying it and parking it. Three are worth buying: a carry case sized for its coiled cable, a connector holster and cable hook at the home spot, and — for households that also run a J1772 car — a JT02 adapter. None of them changes how fast it charges.

Key Takeaways

  • Buy the case on fit: it must swallow the coiled 25 or 28 ft cable and pad the display.
  • A NACS-shaped holster and a cable hook give the charger wallbox manners at home.
  • The JT02 is the one functional add-on — AC only, up to 80 A, subject to the car maker’s approval.
  • No accessory changes charging speed; these protect the charger and extend which cars it can serve.
EVDANCE EV-ACS4005T 40A NACS portable EV charger
The accessories below are bought around the EV-ACS4005T — a case, a home dock, one adapter.

The Carry Case: Buy on Fit, Not on Branding

Cases for portable chargers are generic accessories — EVDANCE does not list one as part of this charger’s range — so buy on measurements, not on a model name printed on the fabric:

  • It fits the coil, not just the box. The bulky item is the 25 or 28 ft cable in wide loops. A case that fits the control box but forces the cable into tight bends is the wrong case; measure your coil.
  • Padding sits over the display. This unit’s 1.77-inch display is the face most likely to meet loose cargo. Look for a padded divider or a display-inward design.
  • A handle or strap you will actually use. The case is carried between car and outlet in all weather; a grip that works with gloves wins.
  • Hard shell versus soft bag. A hard shell protects against cargo stacked on top; a soft bag packs smaller. Choose by what else rides with it.

For any accessory with a mains plug or electrical rating, apply the charger check: look for listing by a recognised testing laboratory, the programme OSHA describes in the sources below.

At the Home Spot: A Holster and a Hook

When the portable is home, it behaves like a wall charger — and deserves the same parking manners. A connector holster gives the NACS connector a capped home off the floor, and a cable hook keeps the long lead looped instead of trailing across the garage. Our article on how to hide and manage an EV charger cable covers placement and routing. Before buying a dock, check that it is shaped for the NACS connector, not a J1772 one, and holds the connector without bending the cable hard at the entry. Keeping the connector capped and off the ground is also basic care — grit on the contacts is the wear item our guide to cleaning an EV charger connector deals with.

Close-up of a hand plugging an EVDANCE portable EV charger connector into a car
The connector is what every accessory here protects — capped in its case, docked at home.

The One Functional Add-On: A JT02 Adapter

Accessories so far protect the charger; one add-on extends it. The EV-ACS4005T has a NACS connector; if your household also has a car with a J1772 inlet, the EVDANCE JT02 adapter bridges NACS to J1772 for AC charging, at up to 80 A — above this charger’s 40 A ceiling. Two conditions come with it: AC charging only, never DC fast charging or Superchargers; and adapter use is subject to the car maker’s approval, so check your car’s manual first.

Add-onWhat it solvesCheck before buying
Carry caseTrunk knocks, tangled kit, grit on the connectorFits the full cable coil; padding over the display
Connector holster / dockConnector stored capped and off the floor at homeNACS shape; holds without a hard cable bend
Cable hook / organiserA long lead trailing across the garageWide curve, no sharp edges; lead off drive paths
JT02 adapterCharging a J1772 car from this NACS chargerAC only; car maker’s approval; rating covers your setting

The charger itself is the EVDANCE EV-ACS4005T: a 40 A NACS portable delivering 9.6 kW from a NEMA 14-50 plug, with 16/24/32/40 A settings, a 1.77-inch display, IP66 enclosure and a 25 or 28 ft cable. The full range is on our products page.

Frequently Asked Questions

Does EVDANCE sell a case for the EV-ACS4005T?

No case is listed as part of this charger’s range; the product page is the place to check what is currently offered. Cases are generic accessories — the fit checks above matter more than branding.

Do I need a holster if the charger lives in the car?

Not for the car — the case does that job. A holster earns its place at the home spot: connector capped, dry and off the floor between sessions.

Can an accessory make the charger charge faster?

No. Cases, holsters and hooks change nothing electrical, and the JT02 adds a second kind of car it can serve, at the same speeds. Speed is set by the setting, the circuit and the car.

Related Reading

Sources & Standards

EVDANCE · EV Charger Manufacturer

Looking for a reliable EV charger supplier?

Portable EV chargers and wallbox home chargers for distributors, installers and brands. Tell us your market and we will reply with a quote.

  • OEM / ODM from 50 units
  • 3-year standard warranty
  • FOB / DDP shipping worldwide
Share the Post:

Related Posts

0