Evdance
Select Language
English (US)
Deutsch
Français
Nederlands
Polski
Русский
한국어
ภาษาไทย
Tiếng Việt
Español
Português
العربية

Road-Trip Kit: EV-ACS4005T Plus JT08 for CCS1 Drivers

For a CCS1 driver: the JT08 covers DC stops under two conditions, the EV-ACS4005T covers overnight AC — through the JT02. The honest three-piece road-trip kit.

EVDANCE Insights · EV Charging Guides

For a driver whose car has a CCS1 inlet, this road-trip kit covers the route in two halves — and it is honest about a third piece. The JT08 adapter covers DC fast stops at NACS stations, only where your car maker approves a third-party DC adapter for your exact car and the station is open to it. The EV-ACS4005T portable covers overnight AC charging — but it is a NACS charger, so on a CCS1 car it connects only through the JT02 AC adapter. Pack all three, and every kind of stop on the route has an answer.

Key Takeaways

  • The JT08 covers DC fast stops at NACS stations — under maker approval and an open station, both checked before departure.
  • The EV-ACS4005T is a NACS portable: on a CCS1 car it charges only through the JT02, so the honest kit is three pieces.
  • The overnight leg also needs a NEMA 14-50 outlet and the host’s permission at the destination.
  • Adapters are not interchangeable: JT02 is AC-only, JT08 is DC-only.
EVDANCE EV-ACS4005T 40A NACS portable charger
The EV-ACS4005T: the kit’s overnight half — a NACS portable, hence the JT02.

What Each Piece Is For

A road trip asks for two kinds of charging: fast energy mid-route, and a full battery by morning. One piece per job:

StopPiece(s)Condition
DC fast stop at a NACS station open to your carJT08Maker approval for your exact car, and the site open to it
Overnight at a destination with a NEMA 14-50 outletEV-ACS4005T + JT02The outlet exists and the host allows charging; the session runs at the car’s acceptance
A native CCS1 DC stationNoneYour car plugs in directly
A NACS destination charger (AC)JT02 aloneAC only — the JT08 stays in the bag

The AC Leg, Stated Plainly

The EV-ACS4005T is listed as a NACS portable charger: 9.6 kW, a NEMA 14-50P plug, current steps of 16/24/32/40 A, a 25 or 28 ft cable, an IP66 housing and a display. Its connector fits NACS cars directly — and a CCS1 car is not one of those: the AC part of a CCS1 inlet is the J1772 shape, so the portable’s NACS plug needs the JT02 between it and the car. The JT02 is an AC-only adapter; it plays no part in any DC session. If the trip’s other car is a NACS car, the same portable serves it directly with no adapter in between.

The destination precondition is an outlet: a NEMA 14-50 at an RV park, a rental or a relative’s garage, with the host’s permission to charge — see our explainer on what a NEMA 14-50 outlet is. Where no such outlet exists, the route leans on DC stops instead.

Before You Leave

  • JT08 conditions, checked in advance: your maker’s approval of a third-party DC adapter for your exact model, read in the maker’s current document, and each planned NACS DC site confirmed open to your car.
  • JT02 in the car: it belongs to the CCS1 car’s kit — without it, both the destination charger and the portable are unusable to you.
  • Destination outlet confirmed: a NEMA 14-50 socket exists where you sleep, charging is allowed, and the portable’s step is set to what that circuit can carry continuously.
  • Both adapters inspected: contact faces clean and undamaged before departure — the same check our guide to whether EV charging adapters are safe recommends before any trip.
EVDANCE JT08 NACS-to-CCS1 DC adapter
The JT08: DC fast stops at NACS stations, under the two conditions.

The Kit on the Shelf

The EV-ACS4005T is the overnight piece: a 9.6 kW NACS portable with four current steps, for the 14-50 outlets a trip offers. The EVDANCE JT08 is the en-route piece: a NACS-to-CCS1 DC adapter rated up to 500 A and 1000 V, IP66-sealed, used only under the maker-approval and open-station conditions above. And the EVDANCE JT02 is the bridge that makes the portable usable to a CCS1 car at all — an 80 A AC adapter that also opens NACS destination chargers to the same car.

Frequently Asked Questions

Can I plug the EV-ACS4005T straight into my CCS1 car?

No. Its connector is NACS, and the AC side of a CCS1 inlet is J1772-shaped, so the JT02 AC adapter goes between them. DC stops are a different piece entirely — the JT08.

Can the JT02 replace the JT08 at a Supercharger?

No. The JT02 is AC-only; a Supercharger session is DC. At a NACS DC station the JT08 is the piece, and only with your maker’s approval for your car and a station open to it.

Is the JT08 alone a complete road-trip kit?

For DC stops, where its two conditions pass, yes. Overnight AC charging at the destination is the gap it leaves — that is the portable’s job, and on a CCS1 car the portable needs the JT02 to connect.

Related Reading

Sources & Standards

EVDANCE · EV Charger Manufacturer

Looking for a reliable EV charger supplier?

Portable EV chargers and wallbox home chargers for distributors, installers and brands. Tell us your market and we will reply with a quote.

  • OEM / ODM from 50 units
  • 3-year standard warranty
  • FOB / DDP shipping worldwide
Share the Post:

Related Posts

0