The chargers that suit the Netherlands are sorted first by smart readiness: whether the listing states the connectivity your buyer’s platform needs. A station bound for a platform needs “OCPP 1.6J” on its listing; “OCPP-ready” is a different, weaker claim, closed with the manufacturer in writing. Phase supply and connector family come second, confirmed per site and per model — no Dutch grid figures are asserted here, because fit is closed by confirmations, not assumptions.
Key Takeaways
- Sort by smart readiness first: match the platform need to the connectivity the model’s own listing states.
- “OCPP 1.6J” and “OCPP-ready” are different claims — never upgrade the weaker one.
- Phase supply and connector family are confirmed per site and per model, against the nameplate.
- No Dutch grid figures are asserted here; the confirmations, dated October 2026, are the answer.
Start With the Platform Requirement, Read Off the Listing
| What your buyer needs | Listing wording that proves it | In the EVDANCE range | The trap |
|---|---|---|---|
| Stations run on a chosen charge-point platform | “OCPP 1.6J” stated on the model’s own listing | EV-AC03201T dual-connector AC station and EV-RHDC30K-L compact DC charger — both state OCPP 1.6J | Reading a brand-level claim as a model-level one — the protocol belongs to the model |
| Managed wallboxes with access control | “RFID and app” stated | EV-ACT3204PE 22 kW wallbox states RFID and app | Assuming app control means platform integration — it does not |
| A portable with app control and energy monitoring | “App, energy monitoring, OCPP-ready” stated | EV-ACS3210E states app and energy monitoring and is described as OCPP-ready | Upgrading “OCPP-ready” to “OCPP 1.6J” in your own material — the listing does not say it |
| Simple charging, no platform | No connectivity stated | The remaining portables and wallboxes, judged on electrical fit alone | Paying for management features the site will never use |
What the protocol does between charger and platform is set out in OCPP explained for charge point operators — the vocabulary is where the mismatches hide.

What “OCPP-Ready” Does and Does Not Promise
“Ready” is the most misread word in charger listings: it can mean the hardware carries the provision, or that a variant can be ordered — the listing does not say which. Before stocking an OCPP-ready model for platform customers, put three questions to the manufacturer and file the answers: ready in which sense; tested against which platform, if any; and is the capability in the units you will receive, or an option to specify at order? Until the answers are written, sell the model on what its listing does state — app control and energy monitoring for the EV-ACS3210E — and keep it out of platform tenders. Where a listing states OCPP 1.6J, that — no more — is the claim you may repeat.
Phases and Connectors: Confirmed Per Site, Per Model
With connectivity sorted, the electrical checks are the familiar two. First, the supply: the EVDANCE European range splits between three-phase Type 2 models — the EV-ACT3204PE wallbox at 22 kW and the CEE-plug portables EV-ACS3205PE at 22 kW and ACS1605PE at 11 kW — and the single-phase EV-ACS3210E at about 7 kW. Which a site can run, your installer confirms at that address (see single-phase vs three-phase charging). Second, the connector family: these models are listed with Type 2; which family your buyers’ vehicles present is a count from your own channel (see our connector comparison). Close both against the nameplate window of the exact market version, in writing as of October 2026.

Ordering the Range for the Netherlands From EVDANCE
EVDANCE is a Shenzhen manufacturer founded in 2011, exporting to more than 30 countries, with a 3-year standard warranty and private label from 100 units. Work the smart-readiness sort against the full product range, and bring your platform questions into the first conversation, through the distributor program or contact us.
Frequently Asked Questions
Is “OCPP-ready” enough for a platform rollout?
Not on the listing’s word alone: “ready” states no protocol version and no tested platform. Get the manufacturer’s written answers before offering the model to platform buyers.
Which EVDANCE models state OCPP 1.6J?
Two: the EV-AC03201T dual-connector AC station and the EV-RHDC30K-L compact DC charger. Other models state different connectivity — RFID and app on the EV-ACT3204E, app and energy monitoring on the EV-ACS3210E — and are sold on exactly those words.
Which voltage and phases do Dutch sites use?
This article does not state them, deliberately. Fit is closed per site — your installer confirms the supply at the address — and per model, against the nameplate window of the market version confirmed for the Netherlands, in writing as of October 2026.
Related Reading
- OCPP Explained: What Charge Point Operators Need From EV Charger Hardware
- Single-Phase vs Three-Phase EV Charging: 7kW, 11kW and 22kW Explained
- Type 2 vs J1772 vs NACS: Which EV Charger Connector Does Your Market Need?
- 11 kW vs 22 kW Wallbox: Which Should Distributors Stock for Europe?

