The chargers that suit Brazil are the ones whose nameplate window covers the supply your sites actually have — and for a distributor, that check repeats region by region, because a written confirmation for one area does not clear a model for the next. Where confirmed supplies differ between your regions, adjustable-current models earn their shelf space: one stocked model, set per site, instead of a fixed model per region. Connector family follows the vehicle parc you serve, counted by you, in each region.
Key Takeaways
- Clear models region by region: one written supply confirmation never covers the next region.
- Adjustable-current models earn their place where confirmed supplies differ across your territory.
- Connector family is a parc count per region, not a national guess.
- The worksheet comes before the stocking decision — nameplate window against confirmed supply, every time.
One Country, Several Confirmations
Work region by region, and keep a worksheet per region rather than a single national assumption. For each area you sell into, your local installer partner and the supply-side authority for that area confirm the same three things in writing: the supply configuration a typical site presents, the voltage window a charger must accept there, and whether single-phase, three-phase or both are in play. Only then does a model get cleared — for that region. A model cleared in your first region is a candidate in the second, not a conclusion.
| Your region | Supply confirmed with | What the confirmation must state | Models cleared for this region |
|---|---|---|---|
| Region 1 (your first market) | Installer partner + supply authority for the area | Supply configuration, voltage window, phases available | List only models whose nameplate covers the stated window |
| Region 2 | Same route, closed separately | The same three items — never carried over from Region 1 | May differ from Region 1; adjustable models usually survive both |
| Each new region | Same route again | Same three items, dated as of October 2026 | Added to the worksheet before the first order ships there |
Why Adjustable Models Earn Their Shelf Space
Where your worksheet shows different confirmed supplies across regions, flexibility is worth more than a fixed model’s last increment of output. In the EVDANCE range, the EV-ACS4005T portable adjusts across 16/24/32/40 A settings at 9.6 kW, and the EV-ACS3210T offers 10–32 A in six steps at about 7.7 kW. A model like these is set to the confirmed supply at each site, so one stocked line serves regions whose confirmations differ — and a site whose supply is smaller than the model’s maximum still gets a correctly set charger rather than a rejected installation. Circuit sizing for each setting stays with your licensed installer, confirmed per site. Fixed-output models remain the simpler choice in any region where your confirmations come back uniform.
Connector Family Follows Your Parc — Per Region
The range splits by connector family: North-American-format portables (NACS and J1772 lines) on one side, Type 2 models on the other — the EV-ACS3210E single-phase Type 2 portable at about 7 kW, the three-phase Type 2 EV-ACT3204PE wallbox at 22 kW, and the CEE-plug three-phase portables. Which family a region needs is a count, not an opinion: survey the inlets of the vehicles your customers in that region actually run, and stock the family that count supports. Do not let one region’s parc decide another’s shelf.
Ordering for a Mixed Territory
EVDANCE is a Shenzhen manufacturer founded in 2011, exports to more than 30 countries, and carries a standard 3-year warranty. Send us your regional worksheet — the confirmations you have closed and the ones still open — and the range can be sorted against it model by model via the full product range or a conversation through contact us. A model we cannot match to a stated nameplate window for your region will be flagged as a written-confirmation item, not sold around the gap.
Frequently Asked Questions
Can I stock one model for the whole country?
Only after the per-region confirmations say its nameplate window covers every region you sell into. Where the confirmations differ, adjustable-current models or a deliberately split range are the honest answer — one national assumption is how distributors end up with stock that one region cannot install.
Which voltage do chargers for Brazil need?
The voltage confirmed in writing for each region and site — read against the model’s stated nameplate window. Never carry a figure over from another region or another market.
Do three-phase models fit Brazilian sites?
Where the site’s confirmed supply is three-phase, the three-phase Type 2 models are the candidates; where it is single-phase, they are not. The per-site confirmation decides, which is why the worksheet comes before the stocking decision.
Related Reading
- EV Charging News: Brazil Passes 25,000 Charging Points as DC Chargers Grow 32.8% in Three Months
- How to Choose a Portable EV Charger Supplier: A B2B Checklist for Importers
- IP Ratings for EV Chargers: IP54, IP65 and IP66 Compared
- EV Charger Certifications Explained: CE, UKCA, UL, ETL, CB and What Buyers Should Ask For
