Three checks decide which chargers suit South Africa: the nameplate window against the supply your sites have, confirmed in writing; the connector family against the vehicles your customers drive; and written answers on interruption behaviour — no listing states it, and assuming it ends with wrong units.
Key Takeaways
- Suitability is three checks: nameplate window vs confirmed supply, connector family vs surveyed parc, interruption behaviour in writing.
- No listing states interruption or backup behaviour; an unanswered question means it is not a documented feature.
- Adapters change shape only — never a wrong-market charger into a right-market one.
- The DC unit’s connector variant is unnamed — confirm it in writing before ordering.
First Check: The Nameplate Window Against a Confirmed Supply
Start from the site, not from a national figure. Have each site’s supply confirmed in writing — voltage window, single-phase or three-phase — then read the model’s stated window against it. Ranges split by build: our explainer on single-phase vs three-phase charging shows how the phase build sets the power class. A model whose window covers it is a candidate; one built for another market’s supply is not, however familiar its name. Where a supplier offers a market version, that version’s nameplate is the document to check.
Second Check: The Parc Decides the Connector Family
Count the inlets of the vehicles you actually serve before fixing a connector family. The range splits visibly: Type 2 lines, and NACS or J1772 lines built in North American form with NEMA plugs. Your parc — surveyed, not guessed — decides which half of any range is relevant, the same logic our guide to choosing plug and connector by market applies to private-label orders. An adapter changes shape only: no added power, no protocol conversion, and it never turns a wrong-market charger into a right-market one.
Third Check: Interruption Behaviour — Questions Only a Written Answer Settles
Drivers already ask what happens when power drops (see our guide to charging an EV with a generator). For a buyer it is a specification exercise: listings are silent on all of it:
| Question to put in writing | Why it matters | What a usable answer looks like |
|---|---|---|
| What does a session do when supply is interrupted — resume, restart, or end? | Whether an interrupted charge recovers alone or waits for a person | A stated behaviour for the exact model, not a range-level assurance |
| Where a site has its own backup supply, is the model stated to work with it? | Compatibility assumed at order time becomes a returns problem after installation | A model-specific written statement, plus the site electrician’s confirmation |
| When power returns, does the unit restart automatically or need manual action? | Sets the site routine, and whether unattended sites recover alone | A stated power-return behaviour for the site’s operating notes |
| Are settings and session records kept through an outage? | Settings or records that reset silently create support work | A stated retention behaviour for the model you are buying |
Ask all four before ordering, of any manufacturer. An unanswered question is itself an answer: the behaviour is not a documented feature.
The Stated Facts You Can Shortlist From Today
The stated Type 2 lines: the EV-ACS3210E (single-phase, about 7 kW, Type 2, IP66), the ACS1605PE (11 kW three-phase, CEE 5-pin, Type 2, IP66), the EV-ACS3205PE (22 kW three-phase, CEE 32A plug, Type 2, IP66), the EV-ACT3204PE wallbox (22 kW, tethered Type 2 cable, RFID and app, IP66, CE) and the EV-AC03201T station (two Type 2 connectors, up to 43 kW shared, OCPP 1.6J, RFID, IP54 — a covered-bay product; see the IP ratings comparison). The EV-RHDC30K-L adds compact DC (22 kW DC, OCPP 1.6J) — below the public fast band, connector variant unnamed, so it joins the confirmation list.
Putting the Three Checks to EVDANCE
EVDANCE is a Shenzhen manufacturer founded in 2011, exporting to more than 30 countries, with a 3-year standard warranty. Send your confirmed supply figures, parc connector count and the four interruption questions via contact us, and ask for answers against the exact models on the product range — in writing, before ordering.
Frequently Asked Questions
Does any EVDANCE charger state that it works on backup power?
No listing states it for any model. Treat it as an open written question for the exact model, and have the site’s electrician confirm any backup arrangement on the installation side.
Which connector family should a South African distributor stock first?
The one your surveyed parc uses: count your first customers’ inlets, stock the family the count supports, and add the other family later, on evidence.
Can an adapter make a North American model suit my market?
No — shape only, not the stated input window, the plug or the market build. The nameplate check still decides.
Related Reading
- Single-Phase vs Three-Phase EV Charging: 7kW, 11kW and 22kW Explained
- IP Ratings for EV Chargers: IP54, IP65 and IP66 Compared
- Choosing Plug, Cable and Connector for an OEM Charger by Market
