There is no industry-wide minimum order for a custom EV charger. Every factory quotes its minimum against a depth of customisation: a logo printed on a standard model and a new enclosure built to your specification are different projects, with different kinds of minimum. One published anchor exists — EVDANCE states private label from 100 units — but that line describes one factory’s offer at branding depth, not a market rule. The skill is reading any quoted minimum with its depth attached.
Key Takeaways
- No industry minimum exists; every quoted minimum belongs to a depth of customisation.
- EVDANCE’s private label from 100 units is a label-depth anchor for existing models, not a market rule.
- A quoted minimum needs four attachments: per what, at which depth, first order or every order, and what happens below it.
- A very low minimum against deep customisation is a reading flag — ask what quietly shrinks, moves or sits outside the certificate.
A Minimum Is a Depth Statement
Custom work comes in three broad depths, and the minimum behaves differently at each:
| Depth | What changes | How the minimum behaves |
|---|---|---|
| Label depth | Your logo, colours, packaging and manual on a standard model | The lowest minimums live here — this is where a figure like 50 units is quoted |
| Configured depth | Options selected inside the model’s existing certification: connector, cable, settings, graphics | The minimum can split per option; each variant is counted on its own |
| Custom hardware depth | A new enclosure, new features or changed electronics | A development project; the minimum reflects tooling and certification work, and is negotiated, not listed |
Why set-up work drives these numbers — print runs, colour batches, component lots — is covered in our explainer on what sets minimum order quantities.
Four Attachments Every Quoted Minimum Needs
Before treating any figure as an answer, get four attachments in writing:
- Per what? Per model, per colour, per plug or cable variant — or per order in total? A minimum counted per variant multiplies quietly across a range.
- At which depth? What exactly does the number buy: the label, a configured option, or development work? Quotes that leave the depth vague are not quotes yet.
- First order, or every order? Some minimums are an entry condition; others bind every reorder — the term that decides your stock risk for years.
- What happens below it? A higher unit price, a set-up charge, or a refusal — each is legitimate, but you need to know which one you are signing.
Only with those four attached can two factories’ numbers be compared. A minimum of 50 at label depth and 50 at hardware depth are not the same offer wearing the same number.
The Low-Minimum Trap
The reading flag in this market is a very low minimum quoted against deep customisation. Often, one of three quieter things is happening: the depth silently shrinks to a label while the conversation stays deep; the set-up costs the minimum was meant to spread reappear as separate charges later; or the variant you discussed sits outside the model’s certificate — an untested promise. None of these is visible in the number. All three become visible when you ask the four attachment questions and request the certificate for the exact configuration — the check our guide to certificate ownership in private-label chargers sets out. The reverse deserves a question too: a strikingly high minimum at label depth may mean your project is being priced as someone else’s.
The One Published Anchor: EVDANCE
EVDANCE is a Shenzhen EV charger manufacturer founded in 2011, with its own factory, exports to more than 30 countries and a 3-year standard warranty. Its stated starting point is private label from 100 units, set out on the OEM and private-label program page — a label-depth figure for existing models from the product range. Configured options and deeper work are scoped per project, their minimums part of that written scope: raise them through our contact page and hold us to the same four questions.
Frequently Asked Questions
Is 50 units a typical minimum order for a custom charger?
It is EVDANCE’s stated starting point for private label on existing models — one factory’s published offer at label depth, not an industry standard. Any figure only becomes meaningful with its depth and attachments named.
Can I order a smaller batch first to test the product?
Samples and pilot runs are a factory-by-factory arrangement, not a right that comes with a quoted minimum. Ask explicitly — and whether a pilot counts towards the first order’s minimum.
Does the minimum apply again when I reorder?
It depends on the terms you signed — which is why first-order and reorder minimums are separate questions. Get both in writing before the first order.
Related Reading
- EV Charger MOQ Explained: What Sets Minimum Order Quantities
- OEM and Private-Label EV Chargers: A Complete Guide for Brands
- OEM vs ODM EV Chargers: How Private-Label Charging Works
- Who Owns the Certificate in a Private-Label EV Charger?
