Evdance
Select Language
English (US)
Deutsch
Français
Nederlands
Polski
Русский
한국어
ภาษาไทย
Tiếng Việt
Español
Português
العربية

Type 1 vs Type 2 Connectors: What Is the Difference?

Type 1 is single-phase with a latch on the plug; Type 2 carries single- and three-phase and is locked by the car. The differences that matter, side by side.

EVDANCE Insights · EV Charging Guides

Type 1 and Type 2 are the world’s two AC charging connector families, and they differ in more than shape. Type 1 (SAE J1772) is the single-phase standard of North America and Japan, with a latch on the plug that you release by hand. Type 2 (IEC 62196) is Europe’s standard: it carries single-phase and three-phase power, and the locking is done by the car, not by a latch on the handle. Which one a charger needs is decided by the car’s inlet — the two do not fit each other.

Key Takeaways

  • Type 1 is single-phase with a latch on the plug; Type 2 carries single- and three-phase and is locked by the car.
  • The two shapes do not fit each other — a charger is ordered for the car’s inlet.
  • Type 2’s car-side locking is why socketed posts and bring-your-own-cable charging work in its markets.
  • Speed comes from the supply and the car, not the connector name alone.
EVDANCE EV-AC04001U portable charger with a Type 1 (J1772) connector
A Type 1 portable charger: the latch on top of the plug is the family’s signature.

The Two Families, Side by Side

DimensionType 1 (SAE J1772)Type 2 (IEC 62196)
Home groundNorth America, Japan; older and non-Tesla carsEurope, the UK, and much of the rest of the world
PhasesSingle-phase onlySingle-phase and three-phase in the same connector
How it locksA latch on the plug itself, released by the driver’s thumbNo latch button on the plug — the car’s inlet locks the connector in place
Its DC partnerCCS1: two large DC pins added below the Type 1 headCCS2: two large DC pins added below the Type 2 head
Typical public postsUsually a tethered cable ending in the plugOften a socket on the post — drivers bring their own cable

The Locking Difference You Feel Every Session

The phase difference is the one in the specification tables, but the locking difference is the one drivers notice. With Type 1, the plug carries a spring latch and a release button: you squeeze, and the connector comes away — the decision is in your hand. With Type 2, the plug has no release button. The car’s inlet pins the connector in place, and the car decides when it lets go — commonly when the car is unlocked or the session is properly ended.

That design has practical consequences. A Type 2 cable generally cannot be pulled out of a locked car by a passer-by, which is one reason socketed public posts work in Type 2 markets: the cable stays with the car it is charging. It also means the “stuck cable” moment is a car question, answered by the car’s own unlock routine — not by pulling harder on a handle that has no release.

What the Difference Means When You Buy a Charger

A charger’s connector name describes the car end of the cable — the end that must match your car’s inlet. It says nothing by itself about the wall end, which may be a plug for an existing socket or a hard-wired connection, and nothing about speed on its own: a Type 2 unit on a single-phase supply delivers single-phase power, and three-phase charging needs both the connector and a three-phase supply behind it. Order the connector for the car, then confirm the supply side separately.

In the EVDANCE range the two families sit side by side. The EV-AC04001U is the Type 1 portable charger (40 A J1772, 9.6 kW, NEMA 14-50P, IP66, 25 ft). The Type 2 family is the EV-ACS3210E portable (32 A, single-phase about 7 kW, IP66) and the EV-ACT3204PE wallbox (22 kW three-phase, tethered Type 2 cable, RFID and app, IP66, CE). Same job, two inlets — the car chooses which list you shop from.

EVDANCE EV-ACS3210E portable EV charger with a Type 2 connector
The Type 2 side of the range: no latch button on the plug — the car holds the connector.

Frequently Asked Questions

Can a Type 1 car charge at a Type 2 post?

Not by plugging in directly — the shapes do not meet. The bridge is a cable or adapter with the correct ends, a separate purchase with its own stated ratings; treat any such product’s documents as the authority for whether and how it may be used.

Is Type 2 faster than Type 1?

Type 2 can be, because it can carry three-phase power — 11 kW and 22 kW classes exist behind it. The connector alone guarantees nothing: the supply and the car’s own charger set the real speed, and a Type 2 unit on a single-phase supply charges at single-phase rates.

Which connector does a Tesla use?

It depends on where the car was sold: North American cars use NACS, European cars use Type 2 — a regional split our guide to charging a Tesla in each region works through. Check the inlet on the car in front of you, not the badge.

Related Reading

Sources & Standards

For buyers: EVDANCE is a portable EV charger manufacturer in Shenzhen — wholesale, private label and OEM portable chargers, with samples before bulk orders.

EVDANCE · EV Charger Manufacturer

Looking for a reliable EV charger supplier?

Portable EV chargers and wallbox home chargers for distributors, installers and brands. Tell us your market and we will reply with a quote.

  • OEM / ODM from 50 units
  • 3-year standard warranty
  • FOB / DDP shipping worldwide
Share the Post:

Related Posts

0