Evdance
Select Language
English (US)
Deutsch
Français
Nederlands
Polski
Русский
한국어
ภาษาไทย
Tiếng Việt
Español
Português
العربية

What Adapter Do I Need to Charge a CCS1 Car at a Supercharger?

A NACS-to-CCS1 DC adapter rated for fast charging — and only where your car maker approves it for your car and the Supercharger site is open to it.

EVDANCE Insights · EV Charging Guides

You need a NACS-to-CCS1 DC adapter — an adapter built for DC fast charging, with the NACS plug on the station side and the CCS1 connection at your car. Two conditions decide whether you may use one at all: your car maker must approve third-party DC adapters for your exact car, and the Supercharger site must be open to your car. Confirm both in the maker’s and the operator’s documents before you buy, not at the plug.

Key Takeaways

  • The adapter is a NACS-to-CCS1 DC adapter — the AC adapter class, including the JT02, can never be used at a Supercharger.
  • Two conditions come before the purchase: your car maker’s approval for your exact car, and the site being open to it.
  • Check the adapter’s stated ratings; a session runs at the lowest of station, car and adapter.
  • JT08 (no handle) and JT09 (with handle) are the EVDANCE options in this class.
EVDANCE JT08 NACS-to-CCS1 DC fast charging adapter
The JT08: the adapter class this journey needs. The checks below come before the purchase, not after.

The Adapter Class You Are Shopping For

Superchargers deliver DC. Your CCS1 inlet accepts DC through its two large lower pins — the part of the inlet an AC adapter never touches. The shopping category is narrow, and the common buying mistake is shopping outside it:

AdapterWhat it connectsAt a Supercharger?
NACS-to-CCS1 DC adapterA CCS1 car’s DC inlet to a NACS DC stationYes — this is the one, under the two conditions
NACS-to-J1772 AC adapter, such as the JT02A J1772 car’s AC inlet to NACS destination and home chargersNo — AC only; it can never carry a DC session
J1772-to-NACS adapterThe opposite direction — a NACS car at a J1772 chargerNo — wrong direction entirely

The adapter changes connector shape only: it converts nothing, adds no power, and cannot give a car a DC inlet it does not have. If your car has no CCS1 inlet, no adapter makes this journey possible.

Three Checks Before You Buy

CheckWhere it livesWhat settles it
1. Maker approvalYour car maker’s current owner documentation and adapter guidanceThe maker approves third-party DC adapters — or names its own — for your exact model. Silence means not yet; ask before spending
2. Station accessThe network operator’s current site informationThe Supercharger sites you plan to use are open to your car. Access is granted site by site and changes over time
3. Stated ratingsThe adapter’s own product specificationIts stated current and voltage cover DC fast charging. A session runs at the lowest of the station’s output, your car’s acceptance and the adapter’s rating — the adapter is a ceiling, not a boost

Buy only when all three say yes. An adapter bought on check three alone — the right shape with strong ratings — is still unusable if your maker’s document does not approve it or the site is closed to your car. Adapter safety in general, including the listing to look for, is covered in are EV charging adapters safe?

The Two EVDANCE Options

The EVDANCE JT08 is a NACS-to-CCS1 DC adapter rated up to 500 A / 1000 V, IP66, without a handle. The EVDANCE JT09 is the same class with a handle, rated up to 500 A, IP66. The stated difference between them is the handle; the choice is handling preference, not capability. Both carry the two conditions, restated because they are part of the purchase: use them only where your vehicle maker approves a third-party DC adapter for your exact car, and only at a station open to your car. The JT02 is not a cheaper route to the same journey — it is an AC adapter (up to 80 A, IP65) for destination and home charging, and it has no place at a Supercharger.

EVDANCE JT09 NACS-to-CCS1 DC adapter with handle
The JT09: the handled version of the same adapter class. Approval first, access second, adapter last.

Frequently Asked Questions

My car maker sells its own adapter. Do I have to buy that one?

What matters is the approval, not the badge. If your maker’s document approves third-party DC adapters for your car, an adapter from another maker that meets the stated ratings is within that approval. If the document names only the maker’s own adapter, that is the approved route — follow the document.

Will the adapter give me the Supercharger’s full speed?

No adapter adds speed. The session runs at the lowest of three numbers: what the station delivers, what your car accepts, and what the adapter is rated for. For most CCS1 cars the car’s acceptance is the ceiling, and the adapter’s rating exists to stay above it.

The site near me is not open to my car yet. Should I buy the adapter now?

Only if the other checks already pass and you have open sites you will use. Access changes over time and is decided by the operator; an adapter bought for a closed site is a purchase waiting on someone else’s announcement.

Related Reading

Sources & Standards

EVDANCE · EV Charger Manufacturer

Looking for a reliable EV charger supplier?

Portable EV chargers and wallbox home chargers for distributors, installers and brands. Tell us your market and we will reply with a quote.

  • OEM / ODM from 50 units
  • 3-year standard warranty
  • FOB / DDP shipping worldwide
Share the Post:

Related Posts

0