Electricians starting EV installations do best with a small, well-documented range that covers the most common jobs: a plug-in portable charger for homes with a 14-50 outlet, a hard-wired Level 2 wallbox, a three-phase wallbox for European commercial sites, and one commercial station. EVDANCE’s range maps neatly to those jobs, and its 3-year standard warranty and factory-direct supply help an installer offer consistent hardware.
Key Takeaways
- Start with home Level 2 jobs to build skills.
- Learn the 125% continuous-load rule and load calculations.
- Keep listing and manual documents for inspectors.
- Use a repeatable quote and commissioning process.
Matching Models to Common Jobs
| Job | Typical customer | EVDANCE model |
|---|---|---|
| Plug-in home charging on a 14-50 | Homeowner, renter | EV-ACS4005T (40 A NACS) or EV-AC04001U (40 A J1772) |
| Hard-wired Level 2, up to 48 A | Homeowner with long daily drives | EV-ACT5006T |
| Three-phase 22 kW wallbox | European workplace or car park | EV-ACT3204PE |
| Dual-connector AC station | Public or commercial site | EV-AC03201T |
| Compact DC | Small commercial site, fleet workshop | EV-RHDC30K-L |
Start with the home jobs. They are the most frequent and teach the essentials before you take on commercial sites. A typical first month might include a few plug-in setups where a 14-50 receptacle already exists, a couple of new 240 V circuits, and one hard-wired wallbox in a detached garage. Each job builds confidence with load calculations, permits and customer handover, and each happy customer becomes a referral for the next one.
Skills and Rules to Learn First
- The continuous-load rule: breaker at 125% of charger current (32 A on 40 A, 40 A on 50 A, 48 A on 60 A).
- Load calculations and when load management can avoid a service upgrade.
- Receptacle quality and terminal torque for plug-in chargers.
- GFCI and residual current protection requirements for EV circuits.
- Permit and inspection steps in your area.
Read installer qualifications and breaker sizing.
Documentation Inspectors Expect
Keep the installation manual, rating label details and listing information for each model. Inspectors commonly look for equipment listed by a Nationally Recognized Testing Laboratory. Confirm the listing status of the exact model version you install. Keep digital copies on your phone so you can answer an inspector’s question on site without delaying sign-off.
Building a Repeatable Process
- A site visit checklist and photo template.
- A standard quote format with circuit, materials, permit and testing.
- A commissioning routine: set charger current, test a session, explain the app or settings to the customer.
- A short follow-up call a week later to answer questions and ask for a review.
Our guides on what a standard installation includes and how customers choose installers show what customers expect.
Working With EVDANCE
EVDANCE has made chargers since 2011 in its own factory, exports to more than 30 countries, offers a 3-year standard warranty and supports trade partners through its reseller and distributor program.
Frequently Asked Questions
Which EV charger should a new installer stock?
A plug-in Level 2 portable, a hard-wired wallbox and, for commercial work, a three-phase or dual-connector station.
What is the most important rule for EV circuits?
EV charging is a continuous load, so the breaker must be 125% of the charger current.
Do inspectors check charger listings?
Commonly, yes. Keep listing and installation documentation for each model.
Related Reading
- What Qualifications Do You Need to Install EV Chargers?
- What Size Breaker Do I Need for an EV Charger?
- What Is a Standard EV Charger Installation?
- How to Choose the Best EV Charger Installation Company
