Evdance
Select Language
English (US)
Deutsch
Français
Nederlands
Polski
Русский
한국어
ภาษาไทย
Tiếng Việt
Español
Português
العربية

JT08/JT09 for Dealerships Handing Over CCS1 Cars

Handing over a CCS1 car with a JT08 or JT09: the delivery-bay demo, the two conditions in plain language, and the one-page card that stays in the car.

EVDANCE Insights · EV Charging Guides

At the handover desk, the Supercharger question sounds simple: can this CCS1 car use one? The honest answer is an explanation, not a yes. A JT08 or JT09 adapter lets a CCS1 car charge at a NACS DC station, including an open Supercharger, but only where the car’s maker approves third-party DC adapter use and the site is open to that car. A good handover covers both, demos the fit, and leaves a one-page card in the car.

Key Takeaways

  • The handover answer is two conditions, not a yes: maker approval for the exact car, and a site open to it.
  • Staff show buyers where each answer is checked; neither gate is certified from the desk.
  • The demo covers fit, the end-session-first rule, and inspection — minutes that save a failed trip.
  • A one-page card outlasts the handover conversation; the JT08/JT09 choice is a handling preference.
EVDANCE JT08 NACS-to-CCS1 DC adapter
The JT08 at the desk: two conditions and a fit the buyer can feel — not a promise.

The Question Behind the Question

The buyer is really asking about road trips: whether the NACS network — Superchargers above all — is open to the car they are collecting. An adapter genuinely opens that door. Neither gate belongs to the dealership or the adapter maker: one belongs to the car’s manufacturer, the other to the network. The handover makes both visible before the first trip depends on them.

The gateWho decides itWhat the buyer checks
Adapter approvalThe car’s manufacturerIts current guidance for the exact model — does it approve third-party DC adapters for this car?
Site accessThe network (for Superchargers, Tesla)Its current information on which sites are open to the car — checked per trip
The adapter itselfThe adapter’s listingStated ratings: up to 500 A, IP66 — the session’s ceilings

Staff never state either answer from memory — lists change. Show the buyer where each lives instead.

The Demo on the Delivery Bay

The physical half takes minutes, on the dealership’s own terms: adapter onto the station’s NACS connector first, then the pair into the car’s CCS1 inlet until fully seated.

If a demo unit is at hand, let the buyer feel the fit in their own car’s inlet — better learned in the bay than at a rainy stall. Two habits while it is in their hands:

  • End the session before unplugging. Held while power flows; session first, plug second.
  • Inspect before use. Both faces clean and dry, no cracks, no damaged contacts. A damaged DC adapter is retired.

Name the step-by-step DC guide on the card — the first solo trip is when questions come.

The Card That Stays in the Car

A handover is forgotten by the second week; a card in the glovebox is not. The dealership’s own document needs only six lines:

  • The two conditions, in plain words: your maker must approve a third-party DC adapter for this car, and the site must be open to it.
  • Adapter onto the station connector first, then into the car, pushed fully home.
  • End the session first; unplug second; the adapter comes with you.
  • Where to check open sites (the network’s current station information).
  • Session will not start? Reseat once, check the site, check the approval — in that order.
  • The dealership’s contact for charging questions.

Many dealerships stock the adapter at the parts desk as a delivery-day accessory; sold or bundled is their commercial choice, and handled vs handleless is a handling preference. The card goes in the car either way — the conditions apply to any adapter bought later, anywhere.

The Adapters on the Desk

The EVDANCE JT08 (handleless, up to 500 A / 1000 V, IP66) and the EVDANCE JT09 (with handle, up to 500 A, IP66) are NACS-to-CCS1 DC adapters in the 250 kW family. Both are used only where the vehicle maker approves third-party DC adapter use for the car and the network is open to it. Neither adds power: the session is set by the station and the car’s DC acceptance. The wider picture is in can I use a Tesla charger for other cars?

EVDANCE JT09 NACS-to-CCS1 DC adapter with handle
The JT09, handled form. At handover the choice is grip preference, not capability.

Frequently Asked Questions

Can dealership staff confirm that a buyer’s car is approved for an adapter?

No — approval is the car manufacturer’s current document, for the exact model. Staff show the buyer where that guidance lives; certifying it from the desk puts the dealership’s name on a decision it does not own.

Should the adapter be part of the deal or sold separately?

The dealership’s commercial choice — either works. Not optional is the handover content: conditions, fit, and card, bundled or bought later.

A buyer returns saying the adapter does not work at a Supercharger. What gets checked first?

Three checks, in order: the site open to that car, the maker’s approval covering a third-party adapter for that model, the connector fully seated. The adapter is the last suspect — most refusals are the gates, not the hardware.

Related Reading

Sources & Standards

EVDANCE · EV Charger Manufacturer

Looking for a reliable EV charger supplier?

Portable EV chargers and wallbox home chargers for distributors, installers and brands. Tell us your market and we will reply with a quote.

  • OEM / ODM from 50 units
  • 3-year standard warranty
  • FOB / DDP shipping worldwide
Share the Post:

Related Posts

0