Wholesale buyers order the EV-ACT5006T in volume for resale, distribution or their own brand. It is a 48 A NACS Level 2 wall charger (11.5–12 kW, hardwired or NEMA 14-50P, 7.6 m cable, IP65/IP66, ETL/FCC/CE). EVDANCE offers private label on this model from 100 units. Lead time is not a fixed number — it depends on order size and how much branding the order carries, so it is confirmed in the quotation.
Key Takeaways
- A wholesale order is one fixed configuration of the 48 A NACS wall charger — pin it down before asking for price or timing.
- Private label starts at 100 units; other minimums depend on the layers you add.
- Lead time is driven by order size, branding, sample approval and freight — get it in the quotation, in writing.
What a Wholesale Order Actually Contains
A wholesale order is a production run of one fixed configuration, not a mix of retail units. Before price or timing can be quoted, the configuration has to be pinned down:
| Item | EV-ACT5006T specification |
|---|---|
| Output | Up to 48 A, 11.5–12 kW, single-phase 208–240 V |
| Installation versions | Hardwired, or NEMA 14-50P plug-in |
| Vehicle connector | NACS, on a 7.6 m (25 ft) cable |
| Enclosure rating | IP65/IP66, indoor or outdoor mounting |
| Certifications | ETL, FCC, CE |
Minimum Order Quantities
For private-label orders — your brand on the charger — the floor is 100 units. That low starting point lets a new brand test a market before committing to large volumes. Unbranded wholesale orders and deeper customization carry their own minimums, because each added layer (printed packaging, colour batches, custom artwork) adds fixed set-up work that has to be spread across the run. Our guide to what sets EV charger MOQs explains how each layer moves the minimum, and how an OEM project runs step by step shows where the MOQ decision sits in the process.
What Drives the Lead Time
There is no standard lead time we can print here, because it is set by the order in front of the factory. The main drivers are:
- Order size. Larger runs take longer on the line and in end-of-line testing.
- Branding depth. A plain unit moves fastest; printed packaging, housing colours and screen artwork each add a preparation stage.
- Samples and approval. Most brands test a sample first — see how to test a sample before a bulk order — and production starts from the approved sample.
- Freight. Sea freight, air freight and the shipping terms you choose change the door-to-door time, not just the factory time.
Get the lead time in writing in the quotation, tied to the approved configuration and artwork — not as a verbal estimate. Payment terms should be settled at the same stage; our overview of payment terms for OEM orders compares deposits, T/T and letters of credit.
Private-Label Options, in Brief
On this model, brands can put their logo and colours on the housing and cable, and carry the brand through packaging and manuals; smart features and screen artwork depend on configuration. The detailed menus are covered in our guides to logo and branding options and packaging, labeling and manuals — this article does not repeat them. One limit matters for planning: branding sits on top of the certified product, so the electrical specification in the table above stays as it is.
Ordering Through EVDANCE
EVDANCE is a Shenzhen manufacturer founded in 2011, with its own factory, exports to more than 30 countries and a 3-year standard warranty. Wholesale and private-label enquiries for the EV-ACT5006T start from the product page; brand programs are described on the OEM and private-label page, and distributor terms on the resellers and distributors page.
Frequently Asked Questions
What is the MOQ for a private-label EV-ACT5006T?
50 units. Unbranded wholesale orders and deeper customization have their own minimums, confirmed in the quotation.
How long is the lead time on a wholesale order?
It varies with order size, branding depth and freight. There is no standard figure — ask for it in writing in the quotation, based on your approved configuration and artwork.
Can I order samples before a bulk run?
Yes, and it is the normal route: test a standard sample, approve a branded sample, then release production against it.
Related Reading
- EV Charger MOQ Explained: What Sets Minimum Order Quantities
- How an OEM EV Charger Project Works, Step by Step
- Payment Terms for OEM EV Charger Orders: T/T, L/C and Deposits
- OEM and Private-Label EV Chargers: A Complete Guide for Brands
