On a wall-mounted charging pile OEM/ODM order, a brand can usually customise everything the customer sees and touches: logo and nameplate, housing colour and finish, display start-up screen, LED accent colour, supply plug, vehicle connector, current settings, cable length and packaging. What stays the same is the tested electrical platform inside. At EVDANCE, logo print and a choice of colourway start at 100 units, and full mould customisation with private packaging starts at 500 units. This article maps each customisable element to the order tier it needs, so you can plan a wallbox range without paying for changes you do not need.
Key Takeaways
- Visible elements (logo, colour, finish, LED, display UI, packaging) are customisable on a shared hardware platform.
- Functional choices (supply plug, connector, current, cable length) depend on the model and the target market.
- 100–499 units: custom logo print and a choice of colourway. 500+ units: full mould customisation and private packaging.
- Keep the internal platform unchanged if you want to rely on existing test reports.
- Request a logo proof first: it takes 3–5 days, with revisions before tooling.
What Can Be Customised on a Wall-Mounted Charging Pile
The list below follows the customisation options on the EVDANCE OEM & ODM page. The tier column shows where each one normally becomes available.
| Element | Options | Typical tier |
|---|---|---|
| Logo and nameplate | Your brand on housing, label and nameplate | Sticker on samples; printed from 100 units |
| Colour and finish | Stock colourways or your Pantone code; matte, gloss or textured | Colourway choice from 50 units; custom colour discussed with the order |
| Display UI | Branded screen and start-up graphics, on models with a display | OEM orders |
| LED accent | Indicator light in your brand colour | OEM orders |
| Supply side | Hardwired, or plugs such as NEMA, CEE, Schuko or BS | Model- and market-dependent |
| Vehicle connector | Type 2, Type 1 (J1772) or NACS | Model-dependent |
| Current and cable | Selectable current levels and cable length | Model-dependent |
| Housing shape | Mould changes | Full OEM, 500+ units |
| Packaging | Gift box, carton, manual and labels in your language | Private packaging at 500+ units |
For a deeper look at branding methods (pad print, labels, screen graphics), see logo and branding options for private-label EV chargers.
What Stays Fixed, and Why That Helps You
The power electronics, protection functions and the control logic that talks to the car are the parts covered by safety testing. If they stay unchanged, the existing test reports still describe your product, and the branded version can reach market faster. Change them and you may need new testing. That is why most wallbox OEM projects change the outside and keep the inside.
Mould changes sit in between. A new housing can affect ingress protection and heat dissipation, so expect the factory to re-check the IP rating and thermal behaviour on a changed enclosure. Our guide to tooling and moulds for charger housings covers the cost and time side.
Choosing the Base Wallbox for Your Market
| Market need | EVDANCE base model | Key facts |
|---|---|---|
| Single-phase, Europe and similar markets | EV-ACT3204E | 7 kW, 32 A single-phase, wall-mounted |
| Three-phase 22 kW | EV-ACT3204PE | 32 A three-phase, Type 2 connector, IP66 |
| North America, plug-in install | EV-ACT4001T / U | 6–40 A adjustable, NEMA 14-50 input, NACS or J1772, Wi-Fi and Bluetooth |
| North America, maximum Level 2 | EV-ACT5002T / U | 50 A hardwired, up to 12 kW, front display, optional Wi-Fi / Bluetooth / 4G |
| North America, NACS station | EV-ACT5006T | 48 A / 50 A, hardwired or NEMA 14-50P, IP65 / IP66 |
A model with a display (such as EV-ACT5002) gives you a branded start-up screen. A model with Wi-Fi or Bluetooth raises the question of a private-label app, which is covered in our guide to factory-direct R&D support.
Wall-Mounted or Floor-Standing?
If your buyers are installers fitting homes, small businesses and car park walls, a wallbox range covers most jobs. Sites without a suitable wall, or with two bays to serve from one unit, point to a pedestal or a dual-gun station such as the EV-AC03201T. Choosing pedestal vs wall-mounted chargers sets out the site factors.
A Practical Sequence for a Branded Wallbox Range
- Order samples of one or two base models (1–9 units ship within days) and test them on your market’s sockets and cars.
- Send logo files and colour references. The logo proof takes 3–5 days.
- Place a 100–499 unit batch with logo print and your chosen colourway (2–3 week lead time).
- Once demand is clear, move to full OEM at 500+ units for mould details and private packaging.
The charging pile OEM/ODM guide explains the full project, from brief to shipment.
Planning a branded wallbox? Tell us the market, connector, quantity and branding on the EV charger OEM & ODM page to get a quotation and sample options.
Frequently Asked Questions
Can I change the wallbox colour on a 50-unit order?
From 50 units you can choose a colourway and have your logo printed. Full mould customisation and private packaging start from 500 units.
Does changing the logo affect certification?
The logo itself does not change the electrical design, but the nameplate and documents must show the correct brand and model details. Keep the documentation aligned. See brand compliance files.
Can one wallbox ship with NACS or J1772?
On EV-ACT4001 and EV-ACT5002, yes: the T version has a Tesla NACS connector and the U version has SAE J1772, on the same housing.
Related Reading
- Charging Pile OEM/ODM: How a Wallbox and Charging Station OEM Project Runs
- European Standard Charging Pile OEM/ODM: Type 2, IEC 61851 and the CE File
- Private-Label EV-ACT3204PE: Branding a Three-Phase Wallbox
- Customized EV Charger Manufacturer: What Can Actually Be Customised
Related: Single-Gun Charging Pile OEM/ODM: Choosing the Wallbox Platform for Your Brand
