Using a JT02 at a Tesla destination charger is a short sequence: confirm you may use the charger, fit the adapter onto the charger’s NACS plug, plug the pair into your car, and start the session the way the site directs. The adapter goes on the charger’s plug and comes away with you afterwards — nothing at the site is modified or left behind.
Key Takeaways
- Permission first: a destination charger is the host’s, offered on the host’s terms.
- Adapter onto the charger’s plug, the pair into the car, start as the site directs, confirm on the car’s display.
- If a session will not start, check seating, the car’s own timer settings, then the host.
- Finish in reverse and leave the charger ready for the next driver.
Step 0: Permission Comes First
A destination charger belongs to the business hosting it — a hotel, restaurant, or workplace — and it is normally offered to that business’s guests and customers. Before you plug in:
- Check the signage at the charger for who may use it and any time limits.
- Ask the host if it is not obvious. Front desks are used to the question, and some units are switched on only on request.
- Accept a no. A unit reserved for guests, or set for one brand, is the host’s decision — the adapter does not override it.
The Sequence, Plug to Plug
| Step | What you do |
|---|---|
| 1. Park for the cable | Position the car so the charger’s cable reaches your charge port without stretching across a walkway. |
| 2. Fit the adapter | Take the charger’s NACS plug and push the JT02 onto it until the two are fully seated as one connector. |
| 3. Plug into the car | Insert the combined connector into your car’s J1772 inlet until it seats. A half-seated plug is the most common reason a session never starts. |
| 4. Start as the site directs | Many destination chargers start on their own once connected. Others need the host to enable the unit, or a card, app, or room arrangement — follow the site’s posted method. |
| 5. Confirm on the car | Check your car’s display shows charging and a sensible rate for its onboard charger before you walk away. |
| 6. Finish in reverse | End the session if the site requires it, unplug from the car, take the adapter off the charger’s plug, return the plug to its holder, and take the adapter with you. |
If the Session Will Not Start
Work through the things you can see, in this order:
- Seating. Unplug and refit both joints — adapter to charger plug, then connector to car — pushing each fully home.
- The car’s own settings. A scheduled-charge or departure timer set in the car can hold a session back; your car’s display will usually say so.
- The host’s side. The unit may be switched off, guest-only, or out of service. Ask the host — it is their equipment, and a damaged connector should be reported to them, not worked around.
There are no fault codes to decode on the adapter itself; it is a passive part, and the answers sit with the seating, the car, or the site.
Courtesy at a Shared Charger
- Charge, then move. Destination chargers serve the stay, not the week — free the space once your car has what it needs and others are waiting.
- Never unplug another car to reach the charger yourself.
- Leave it as you found it: cable returned to its holder, no adapter or other gear left behind.
- Report damage. A cracked plug or cut cable is the host’s to fix; telling them protects the next driver.
The JT02 on the Road
The EVDANCE JT02 is rated up to 80 A at AC 250 V and sealed to IP65, so an outdoor destination post in ordinary weather is within its design. Kept in the car, it makes the growing number of NACS destination chargers usable for a J1772 car wherever the host allows it. Our guide to using a Tesla charger for other cars covers the wider picture of permissions and plug types.
Frequently Asked Questions
Which end does the adapter go on first?
Onto the charger’s NACS plug. The adapter and plug then go into the car as one connector. Removal runs in reverse: out of the car first, then the adapter off the charger’s plug.
Do I need an app to use the JT02?
The adapter itself needs no app and holds no account. How a session starts — automatic, host-enabled, or through a site’s own arrangement — is set by the site, so follow its posted instructions.
Can I leave my car on a destination charger overnight?
That is the host’s term, not the adapter’s. Hotels often expect exactly that from guests; a restaurant may not. Check the signage or ask before you settle in.
Related Reading
- Are EV Charging Adapters Safe?
- Can I Use a Tesla Charger for Other Cars?
- What Is J1772? The North American EV Plug Explained
- Is the Tesla Charger NACS? NACS, J3400 and Adapters Explained
