Evdance
Select Language
English (US)
Deutsch
Français
Nederlands
Polski
Русский
한국어
ภาษาไทย
Tiếng Việt
Español
Português
العربية

JT08/JT09 Theft and Loss: Keeping an Expensive Adapter Safe

No lock or tracker is stated for the JT08/JT09. At fast chargers the bigger risk is loss, not theft: the routine that brings the adapter home after every session.

EVDANCE Insights · EV Charging Guides

Nothing on the JT08 or JT09 listings is an anti-theft feature: no lock, no latch and no tracker is stated for either adapter. And at a DC fast charger, theft is only half the problem. Sessions are short, drivers wait nearby, and the common loss is quieter — the adapter left in the station’s connector, or set down on the stall ledge, when the car pulls away. Keeping one safe is a routine: it comes off with the connector and goes to its fixed place in the car before the car moves.

Key Takeaways

  • No lock, latch or tracker is stated for either adapter — protection is a routine, not a feature.
  • At a fast charger, loss beats theft: the adapter is usually left behind in the end-of-session hurry, not taken.
  • The order that saves it: adapter off first, into its fixed place in the car, one glance back at the stall — then drive.
  • Never leave an adapter in a public connector — the one place it is guaranteed to disappear.
EVDANCE JT08 NACS-to-CCS1 DC adapter
The JT08: a loose item by design — its safety is the driver’s routine.

Why Loss Is the Bigger Risk at a Fast Charger

An AC destination session leaves an adapter in a public connector for hours, driver elsewhere — that long window is where theft thinking belongs. A DC fast session is the opposite shape: minutes long, driver present. The window is short, and you are standing in it. What it contains is hurry: the session ends, the cable gets coiled, the car gets loaded — and a small, dark, hand-sized object gets set down “for a second” on the ledge or the connector it just left. Most adapters are not stolen from fast chargers. They are left at them, by their own drivers, in the thirty seconds after a session ends.

The momentHow the adapter disappearsThe counter-habit
During the sessionIn the connector while the driver waits past the session’s endStay within reach of the session’s end — a finished session is simply an adapter in public
The session endsLeft in the station’s connector while the cable is hung backAdapter off first, in your hand, before the cable goes back — never the other order
Driving awayOn the ledge, the bollard, or the ground beside the postThe adapter goes to its fixed place in the car, then a glance back at the stall before you move
Between tripsLoose among luggage, or lent to another driver and forgottenOne home spot in the car; if it is lent, note it like any shared kit

What the Hardware Does — and Does Not — Do

Be clear about the hardware’s part — it is small. Neither listing states a lock, latch or anti-theft feature, so none is claimed here. While a session runs, the connector is held by the station–car arrangement — protection for the live session that ends with it, a property of the charging system, not an anti-theft device on your adapter. The practical rules:

  • Never leave it in a public connector. Not “ready for next time”, not as a favour to the next driver. In the connector is the one place it is guaranteed to be gone.
  • Choose where you wait, where you have the choice. Attended, lit, busy sites shorten every unobserved minute.
  • Give it a visible home. The listings state no case, so a pouch is your own accessory — its job is not security but making the adapter one obvious object in one obvious place, so its absence is noticed before you drive off.

The Adapters Themselves

The EVDANCE JT08 and the EVDANCE JT09 are NACS-to-CCS1 DC adapters rated up to 500 A in the 250 kW class, IP66 — the JT09’s handle also makes it the harder of the two to overlook on a dark ledge. Use either only where your vehicle maker approves third-party DC adapter use for your car and the station is open to it. For the session itself, how to use a DC fast charger, step by step covers the order this routine plugs into.

EVDANCE JT09 NACS-to-CCS1 DC adapter with handle
The JT09: one obvious object, one fixed place in the car, checked before every departure.

Frequently Asked Questions

Does the JT08 or JT09 lock onto the car or the charger?

No lock or latch is stated in either listing. During a session the connector is held by the station–car arrangement; it releases when the session ends and is not an anti-theft lock.

Can someone unplug it mid-session and walk off with it?

A live DC session holds the connector until it ends, so the realistic exposure starts at the session’s end — why the routine takes the adapter off first and puts it in the car before anything else.

Is a tether or cable lock worth fitting?

Your own accessory choice: a tether can slow a casual grab and makes the adapter harder to leave behind, but it is no guarantee — and it must never strain or twist the connector in use.

Related Reading

Sources & Standards

EVDANCE · EV Charger Manufacturer

Looking for a reliable EV charger supplier?

Portable EV chargers and wallbox home chargers for distributors, installers and brands. Tell us your market and we will reply with a quote.

  • OEM / ODM from 50 units
  • 3-year standard warranty
  • FOB / DDP shipping worldwide
Share the Post:

Related Posts

0